Remove the nut (3) with the tool comes with your machine. Poke the bracket (2) through the bolt (1) and fix it with the nut (3). Install EyeleD™ Pointer to the bracket (2) with the screws (5). Note: You can install the EyeleD™ Pointer to the right or left side of the machine. But the manual start arm shall be in the opposite direction of EyeleD™ Pointer. 

Note: EyeleD™ Pointer can be used with batteries or electricity adaptor. If you would like to use the EyeleD™ Pointer with the adaptor to be connected to the electricity only, you may skip the following steps. Just plug in one side of the adaptor to the electricity and the jack plug to the socket at the rear of the EyeleD™ Pointer.

Before proceeding this step, first, clean the surface of the machine from dust and oil that you will adhere the battery box.

Insert 2x AA size batteries by opening the battery box.

Remove the outer layer (2) of double-sided adhesive.

Locate the battery box (2) to the pre-cleaned area (1) and keep pushing it to the machine for around 15 seconds to securely adhere it.

Make sure the “on/off switch”(1) is set to “off” mode. Install the jack plug (2) coming from the battery box to the socket (3) at the rear side of the EyeleD™ Pointer.